Are you searching for some best ways to remove iron-on vinyl from a shirt? Or, possibly, you want to peel it off because it is undesirable to look at. So is there a solution available to your dilemma? If you are currently working on a vinyl project and you made a mistake accidentally, will you be able to solve it? To find the answers to all these questions, the below section of this entire blog will surely help you.
Transferring a heat trader vinyl might be easy, but removing it can be problematic. You don’t need to worry about removing heat transfer vinyl from your shirt because the procedure of removing it is possible. With step-by-step instructions on how to remove heat transfer vinyl, you can easily remove it.
Why Remove Heat Transfer Vinyl?
The most general reason that most crafters wish to remove heat transfer vinyl is that they have either built a mistake when applying it where the vinyl begins to peel. Commonly there are two reasons you might wish to remove heat transfer vinyl (HTV) from your shirt:
- The first one is if you made any Mistake and want to save it and can do the project again. It is much easier to solve the mistake than start again.
- The second reason is when you have an Old Shirt where the vinyl starts peeling off. Revamping your old shirts could be stimulating for your wardrobe without you spending much money on new shirts.
Apart from the reasons mentioned above, there are other reasons also why you want to remove heat transfer vinyl.
- If you are a crafter and Want to recycle, removing heat transfer vinyl from your shirt is the best idea for your project. For this, you don’t need to throw your shirts away.
- It’s a really Easy and Simple Method. If you are a beginner, you will easily apply and remove heat transfer vinyl, and you can be inspired to begin a crafting carrier.
Try Out These Steps to Remove Heat Transfer Vinyl (HTV) From a Shirt
You can use many methods to remove heat transfer vinyl, like iron, an x-Acto knife, scissors, and tweezers. Few methods might take more time to do than others. So here are a few steps you need to follow to start the removing vinyl procedure.
Step 1: Set the Temperature
In the first step, you need to set the iron to the hottest temperature. Ensure to check what heat the materials can handle – unless you plan on figuring out how to remove burnt materials from the tutorials of iron. As a common guide, the following temperatures can be used for these materials types:
- Cotton: 302 degrees F or setting 5
- Linen: 302 degrees F for setting 5
- Polyester: 275 degrees F for setting 3
- Nylon: The lowest setting. Keep in mind that this material type is easy to burn, so you must take more care if you’re using nylon.
Step 2: Place your Shirt over the Iron.
- In this second step, make sure you pull your shirt tight. At this point, it’s very important not to make any kind of mistake. For example, setting the temperature too hot can damage your materials and cause the HTV to come off in small bits rather than one smooth piece.
- It also takes a bit of diligence waiting for the adhesive to start to soften so that it can easily be picked off, but it’s not worth cutting corners with turning the temperature up to be quicker.
Step 3: Pick Away at the Heat Transfer Vinyl (HTV)
Now, you are wondering how you will know when the HTV is too hot to start picking off. The HTV is ready when it starts to peel away from the material. At this step, start by working it off from the edges. If the temperature is correct, it should peel off easily.
Step 4: Remove any Leftover Heat-Temperature Vinyl Adhesive
- While the method is highly powerful and impressive, if your materials are quite dark, they can still leave marks after removing the vinyl. This happens because HTV crunches to the material using an adhesive, so while you are able to remove this, sometimes the adhesive is left behind still.
- One way to prevent this is by throwing your shirt in the washing machine. Once you wash it, push it on a hot setting in the dryer to get rid of the remaining adhesive. This should work but in case it fails, try a steamer.
Things you have to avoid
- Be careful when using goo gone: Ensure that your materials have fully cooled before you spray goo gone on it. Also, don’t use it on leather or silk, as it will damage the fabric.
- Don’t use a heat press: You don’t need to use a heat press because it won’t work as well.
- Make sure to wash the garment before trying this procedure: You have to avoid this because it will loosen the heat transfer vinyl and make it simpler to remove.
- Be careful with the dryer: Check what temperature you have to use for your material; otherwise, you may end up with a miniature version of your shirt.
Conclusion
Removing heat-transfer vinyl (HTV) can be done via heat-based ways or by using a heat-transfer vinyl remover. There are various methods you can use, but using any heat-based way might be frightening. But don’t think too much about it, if you are a beginner and it is your first time, then follow the above tips, and you will definitely be successful.
